PROFINET Device Name Validator
Device name
Suggested name
—
Lower case, transliterated, spaces/underscores replaced by hyphens. Assign it with the engineering tool or a DCP tool, and use the same name in the project.
Rules
- 1…240 characters (some controllers allow less).
- Labels separated by dots, each 1…63 characters.
- Only a-z, 0-9 and hyphen; lower case only.
- A label must not start or end with a hyphen.
- Must not look like an IP address n.n.n.n.
- The first label must not be port-xyz or port-xyz-abcde (digits).